M3-M12 Vertical Type Auto Pneumatic Tapping Tool Air Tapping Drilling Machine

Description

new_template
M3-M12 Vertical Auto Pneumatic Tapping Tool Air Tapping Drilling Machine Pneumaic Tapper Tools
Features:
This Pneumatic Tapping Machine All Machinery Industry, Machine Tools, Tooling Machinery, Plastic Machinery, Printing Machinery, Packaging Machinery, Engineering Machinery, Auto And Motorcycle Parts, Aircraft Engines And Other General Purpose Machinery Industries.
The Tapping Range is: M3 To M12.
Spindle Working Type:
Vertical
Tapping For Copper, Iron, Aluminum, Steel, Stainless Steel, Plastic And Wood, and Other Materials.
Special Suits Machine Manufacture Profession, The Mold Industry, Automotive Industry And Aircraft Motor Manufacture, Ship Manufacturing.
Characteristics:
Tap The Scope From M3 To M12
Re-Positioning Fast, Machining Speed, High Accuracy Wire, and Increased Production Capacity.
Extraordinary Load Operation And Will Not Damage Main Motor.
Adapt Any Work Environment.
Through-Hole Blind-Hole Unstoppable Tool.
Pneumatic Tools, Torque, Light Weight, High Efficiency.
Motor Speed: 400 rpm
Working area: In Radius 1000mm Max
Tapping Range: M3 to M12
Spindle Working Type:
Vertical
Weight:17KG
1, the new patent products, compressed air drive, safe and fast and efficient.
2, the mean pressure and volume (5-8 kg / cm2), large torque.
3, can seal all kinds of steel, iron, copper, aluminum, plastic materials such as tapping.
It is not easily broken wires.
4, bus with overload protection, side attack damage is less, the teeth of high precision.
5, the operation is simple: hand motor, alignment hole, hold the start button and start tapping, tap in the desired depth, hold the exit, tap head stop automatically, complete a tapping operations.
7, the heavier work content does not require positioning device or mobile, suit with universal head are easily done.
8, quick positioning rapid and high cutting speed, increase production.
9, through hole or blind hole, side attack are not peculiar to breakage, pneumatic tapping machine safety torsion clamp cylinder to tap when encountered in the tapping blind holes,
automatic sliding doors, protect the tap head, high precision tap to tap the high precision.
10. Repeat positioning rapid, can continuously tapping operations on a workpiece, removes old tapping machine every tapping, adjusting the workpiece position for the inconvenience,
greatly improve production efficiency;
Wider range of work activities, universal head, can guarantee against spiral Angle.
Precautionary Measures:
1. For your use of the safety, read manual, and used in accordance with the safety instructions to operate this machine, to avoid accidental damage due to misuse.
2. When used well, please placed in the location of the smooth, not placed in high places, to avoid degradation the function of the parts.
3. Rubber base is placed on the corrosive chemicals, not to the machine of the firm.
4. a good job every clean, so as to ensure the life of mechanical, especially two grinding hole is the most important, if not clean, indeed, the parts can wear, and affect the grinding accuracy.
5. The machine normally use under the engine warranty for one year, except the waste parts and grinding wheel.
one, adjust the vertical:
1, let the pneumatic motor at the bottom of the quick change connectors and work desktop or workpiece plane contact, quick change connectors and work desktop,
vertical (quick change connectors with work desktop without clearance), then lock vertical plate or universal head of four locking screw.
2, the air pipe joint in the joint between the engine.
second, the pneumatic motor operation
1, press the front-end pneumatic motor, motor is turned "trigger" of the; The tapping simultaneously the back-end "reverse button" of the pneumatic motor reversal; To exit.
2, parallel arm allows easy tapping position, force a downward, tap it, such as guide screw in and out of the screw hole with very little resistance.
three, air requirements:
1, the inlet section must be 3/8 inch or more than 10mm, length must not exceed 10 m.
2, set the pressure in the 4-8 kg.
3, adjusting air sanlian pieces of drip speed for 3-5 drops per minute, if drip fast motor upper only gets wet from the exhaust oil too much.
4, check the oil in the cup daily, oily and drip speed.
5, use pneumatic tools for oil (viscosity 30 or so); Recommendation: sewing machine lubricating oil, light oil.
" daily maintenance "
1. Frequently give air compressor drainage. air compressor machine often drainage, if air compressor water too much and not discharged in time, will bring pneumatic motor, is long, the bearing is not flexible.
1 x Neumatic Tapping Machine Kit
Shipping
Item will be shipped within 2-3 business days of cleared payment via Post Airmail.
We only ship to buyer's PayPal address, please confirm your address on PayPal before you bid.
Registered air mail takes 10-20 business days to most Countries: US, Canada, UK, Australia and Europe.
Optionally, Express Shipments with tracking service via EMS/DHL/UPS takes 5 to 10 business days.
We would post the tracking number on the order page as soon as it's available.
Important Note:
If you have any concern about the purchase,
PLEASE
feel free to contact us first, we're always ready to help.
Please kidly note that this is international shipping, delay happens occasionally due to unexpected cases.
Any customs tax applied to the parcel should be convered by the buyer.
Please remember to write your phone number which is necessary for the shipping.
Payment
We only accept PayPal.
Payment must be made within 7 calendar days of the auction end time. Non-Paying bidders will be reported.
Refund
It is buyer's responsibility to contact us within 30 calendar days of receiving a defective product. Otherwise, no replacement or refund will be made. All items MUST be returned in their original condition.
Buyer is responsible for shipping and proof of delivery on all returns.