Male Bengal tiger jaws teeth cast taxidermy plastic replica

Description

Upper and lower jaws of a male Bengal tiger are cast in durable urethane resin. Jaw measurements: width =4.9" = 12.5cm (as measured across the rear molar teeth at the widest point), length = 4.9" = 12.5cm (as measured from the incisors to the last molar tooth). Length of cast as measured overall from front to back is 5.9" = 15 cm. Only the upper jaw (palate) measurements are given. The mold was taken directly from a real skull, and is detailed down to the pores and texture of the bone. It also includes a portion of the jaw area. Please note - the cast has been filled with yellow urethane foam for added stability; this can easily be trimmed and shaped as desired. It also readily accepts hot glue. These casts are also paintable - however you will need to lightly scuff the surface with a steel wool or scouring pad in order to get good paint adhesion. I got good results with scuffing, wiping with denatured alcohol and then priming with the spray can automotive-type primer available in stores. Then it can be painted with virtually any type of paint.
Powered by
eBay Turbo Lister
On Jul-18-07 at 20:34:41 PDT, seller added the following information:
On Jun-02-08 at 21:02:06 PDT, seller added the following information:
Track Page Views With
Auctiva's FREE Counter